Convert Wood Burning Fireplace to Gas Cost of 2026

The Midwest Hearth 17-Inch Burner Pipe is an aftermarket replacement burner tube engineered specifically for gas log lighters in wood-burning fireplaces. Wood-burning fireplace owners frequently rely on gas log lighters to simplify the process of starting firewood without using excessive kindling or paper. Over seasons of high heat exposure and ash contact, factory burner pipes can warp, corrode, or clog. This standalone pipe is intended for homeowners seeking to restore their existing ignition setup without replacing the complete log lighter assembly.

In terms of operation, a log lighter burner tube distributes gas beneath a wood grate to ignite logs and establish an upward chimney draft. The manufacturer highlights that this pipe helps heat the chimney flue quickly, which aids drafting and promotes cleaner startup conditions. Because this listing covers only the replacement tube, the unit relies on your existing gas supply line, shutoff valve, and compatible air mixer to deliver and ignite the fuel charge beneath your firewood stack.

Built from low carbon steel containing between 0.05 and 0.30 percent carbon, the pipe balances toughness and heat tolerance with economical maintenance. It measures 17 inches in length with overall dimensions of 17 by 1 by 2 inches, sporting a gray finish that blends into the hearth floor. A standard 3/8-inch NPT male thread is machined at the inlet end, engineered to fit directly into the burner pipe receiving port of the Midwest Hearth Universal Log Lighter air mixer.

Installation considerations focus primarily on thread matching and clearance. Because this pipe handles combustible gas, proper alignment, heat-resistant gas-rated thread sealant, and leak checks are vital during setup. Homeowners should consult the original log lighter manual and follow all applicable local mechanical or plumbing codes. If you are uncertain about working with gas pipe fittings or verifying burner orientation under your grate, consulting a qualified gas service technician or chimney professional is strongly advised.

Buyers must keep in mind that this product is strictly a replacement pipe. It does not include an air mixer, mounting brackets, gas line fittings, or a manual gas valve. Furthermore, compatibility is explicitly specified for the Midwest Hearth Universal Log Lighter air mixer assembly, so it should not be assumed to fit proprietary or differently sized log lighter fixtures from other manufacturers without verifying the 3/8-inch NPT thread and physical clearances.

For fireplace owners looking to refresh a corroded or damaged burner in an existing compatible log lighter, this Midwest Hearth 17-inch pipe offers a targeted, cost-effective solution. As long as your firebox has sufficient width for a 17-inch tube and your air mixer accepts a 3/8-inch NPT connection, this low carbon steel replacement can help restore dependable firewood ignition for seasons to come.

This replacement burner tube is specifically designed to fit the Midwest Hearth Universal Log Lighter with Air Mixer.

The pipe features a standard 3/8-inch NPT threaded end that matches the burner port on the compatible air mixer. Verify your existing air mixer connection size before purchase, as proprietary log lighters from other brands may utilize different thread diameters or configurations.

The burner tube measures 17 inches in total length, with published dimensions of 17 by 1 by 2 inches.

Before ordering, measure the width beneath your fireplace grate and the clearance across your firebox floor to ensure the 17-inch pipe will rest securely in place without contacting masonry walls or obstructing ash cleanout doors.

Constructed from low carbon steel with 0.05 to 0.30 percent carbon content, this tube provides structural toughness suited for fireplace environments.

The heavy-duty steel build is intended to withstand repeated thermal cycling beneath active wood fires while offering an economical replacement alternative to purchasing an entire log lighter kit.